Chemical & Mechanical composite

Specification	Grade	Chemical Composition [%]															Mechanical Properties
		C		Mn		P	S	Si		Cr		Mo		Cu	Ni	V	Yield Strength		Tensile Strength			% Elongation (G.L. 50 mm WT 8 mm) e (min.)
		C		Mn		P	S	Si		Cr		Mo		Cu	Ni	V	Min.		Min.
		Min	Max.	Min	Max.	Max.	Max.	Min.	Max	Min.	Max	Min.	Max	Max	Max	Max	PSI	MPa	PSI	MPa
HYDROCARBON PROCESS INDUSTRY/STRUCTURAL/PRESSURE VESSEL TUBES
ASTM A53	A	–	0.25	–	0.95	0.05	0.05	–	–	–	0.4	–	0.2	0.40 for S	0.4	0.1	30000	205	48000	330	e=625000 A02/U09
ASTM A53	B	–	0.3	–	1.2	0.05	0.05	–	–	–	0.4	–	0.2	0.40 for S	0.4	0.1	35000	240	60000	415	e=625000 A02/U09
ASTM A106	A	–	0.25	0.3	0.93	0.04	0.04	0.1	–	–	0.4	–	0.2	0.4	0.4	0.1	30000	205	48000	330	35L / 25T
	B	–	0.3	0.3	1.06	0.04	0.04	0.1	–	–	0.4	–	0.2	0.4	–	0.1	35000	240	60000	415	30L / 16.5T
	c	–	0.35	0.3	1.06	0.04	0.04	0.1	–	–	0.4	–	0.2	0.4		0.1	40000	275	70000	485	30L / 16.5T
ASTM A333 & A 334	1	–	0.3	0.4	1.06	0.03	0.03	–	–	–	–	–	–	–	–	–	30000	205	55000	380	35
ASTM A333 & A 334	6	–	0.3	0.3	1.06	0.03	0.03	0.1	–	–	–	–	–	–	–	–	35000	240	60000	415	30
SEAMLESS COLD DRAWN PRECISION STEEL TUBES FOR MECHANICAL APPLICATIONS/HYDRAULIC/PNEUMATIC POWER SYSTEMS
EN 10305-1/	E 235		0.17		1.2	0.03	0.03		0.4							0		235		340	25
EN10305-4	E 355		0.22		1.6	0.03	0.03		0.6							0		355		490	22
EN 10216-1	P195 TR1		0.13		0.7	0.03	0.02		0.4		0.3		0.1	0.3	0.3			195		320	27
EN 10216-1	P235 TR1		0.16		1.2	0.03	0.02		0.4		0.3		0.1	0.3	0.3			235		360	25
EN 10216-2	P235 GH		0.16		1.2	0.03	0.02		0.4		0.3		0.1	0.3	0.3	0
DIN 2391	St – 45	–	0.17	0.4	–	0.03	0.03	–	0.4	–	–	–	–	–	–	–	NBK : 215 / GBK : –		NBK : 340 / GBK : 315		NBK : 470
	St – 45	–	0.21	0.4	–	0.03	0.03	–	0.4	–	–	–	–	–	–	–	NBK : 255 / GBK : –		NBK : 440 / GBK : 390		NBK : 570
	St – 52	–	0.22	–	1.6	0.03	0.03	–	0.6	–	–	–	–	–	–	–	NBK : 355 / GBK : –		NBK : 490 / GBK : 490		NBK : 630
ASYM A-519	SAE 1010	0.1	0.13 0.20	0.3	0.6	0.04	0.05	–	–	–	–	–	–	–	–	–	As per Customer requirements
	SAE 1018	0.2	0.28	0.6	0.9	0.04	0.05	–	–	–	–	–	–	–	–	–
	SAE 1026	0.2	0.38	0.6	0.9	0.04	0.05	–	–	–	–	–	–	–	–	–
	SAE 1035	0.3	0.44	0.6	0.9	0.04	0.05	–	–	–	–	–	–	–	–	–
	SAE 1040	0.4	0.21	0.6	0.9	0.04	0.05	–	–	–	–	–	–	–	–	–
	SAE 1518	0.2	0.44	1.1	1.4	0.04	0.05	–	–	–	–	–	–	–	–	–
	SAE 1541	0.4	0.33	1.4	1.65	0.04	0.05	–	–	–	–	–	–	–	–	–
	SAE 4130	0.3		0.4	0.6	0.04	0.04	0.2	0.4	0.8	1.1	0.2	0.3	–	–	–
BOILER/HEAT EXCHANGER/SUPERHEATER & CONDENSER TUBES
ASTM A179	–	0.1	0.18	0.3	0.63	0.04	0.04	–	–	–	–	–	–	–	–	–	26000	180	47000	325	35
ASTM A192		0.1	0.18	0.3	0.63	0.04	0.04	–	0.3	–	–	–	–	–	–	–	26000	180	47000	325	35
ASTM	A-1	–	0.27	–	0.93	0.04	0.04	0.1	–	–	–	–	–	–	–	–	37000	255	60000	415	30
A 210	C	–	0.35	0.3	1.06	0.04	0.04	0.1	–	–	–	–	–	–	–	–	40000	275	70000	485	30
ASTM A 213	T-11	0.1	0.15	0.3	0.6	0.03	0.03	0.5	1	1	1.5	0.4	0.7	–	–	–	30000	205	60000	415	30
	T-12	0.1	0.15	0.3	0.61	0.03	0.03	–	0.5	0.8	1.3	0.4	0.7	–	–	–	32000	220	60000	415	30
	T-22	0.1	0.15	0.3	0.6	0.03	0.03	–	0.5	1.9	2.6	0.9	1.1	–	–	–	30000	205	60000	415	30
ASTM A335	P-11	0.1	0.15	0.3	0.6	0.03	0.03	0.5	1	1	1.5	0.4	0.7	–	–	–	30000	205	60000	415	30
	P-12	0.1	0.15	0.3	0.61	0.03	0.03	–	0.5	0.8	1.3	0.4	0.7	–	–	–	32000	220	60000	415	30
	P-22	0.1	0.15	0.3	0.6	0.03	0.03	–	0.5	1.9	2.6	0.9	1.1	–	–	–	30000	205	60000	415	30
BS 3059 Pt I	320	–	0.16	0.3	0.7	0.04	0.04	0.1	0.4	–	–	–	–	–	–	–	28000	195	46000	320	69500
BS 3059 Pt II	622-490	0.1	0.15	0.4	0.7	0.03	0.03	–	0.5	2	2.5	0.9	1.2	–	–	–	40000	275	71000	490	93000
DIN 1629	St- 37.0	–	0.17	–	–	0.04	0.04	–	–	–	–	–	–	–	–	–	WT 16mm = 235 / WT>16mm = 225		350		–
DIN 1629	St – 52	–	0.22	–	–	0.04	0.04	–	–	–	–	–	–	–	–	–	WT 16mm = 355 / WT>16mm = 345		–		Long 21 / Trans 19
DIN 17175	St – 35.8	–	0.17	0.4	0.8	0.04	0.04	0.1	0.4	–	–	–	–	–	–	–	WT 16mm = 235 / WT>16mm = 225		360		480
DIN 17175	St – 45.8	–	0.21	0.4	1.2	0.04	0.04	0.1	0.4	–	–	–	–	–	–	–	WT 16mm = 255 / WT>16mm = 245		410		530

ASTM A216 WCB CHEMICAL COMPOSITE

Element	Composition, % , All Value are maximum
	WCB	WCC
	UNS J0302	UNS J02503
Carbon	0.30 (Note B)	0.25 (Note C)
Mangaese	1	1.20 (Note C)
Phosphorus	0.035	0.035
Sulfur	0.035 (Note D)	0.035 (Note D)
Silicon	0.6	0.6
Specified residual elements
Copper	0.3	0.3
Nickel	0.5	0.5
Chromium	0.5	0.5
Molybdenum, max	0.3	0.2
Vanadium	0.03	0.03
Total of these specified residual elements (Note E)	1	1

ASTM A216 WCB CHEMICAL COMPOSITE

	WCB	WCC
	UNS J0302	UNS J02503
Tensile strength, ksi [MPa]	70 to 95 [485 to 655]	70 to 95 [485 to 655]
Yield strength, A min, ksi [MPa] (Note A)	36 [250]	40 [275]
Elongation in 2 in. [50 mm], min, % (Note B)	22	22
Reduction of area, min, %	35	35

STAINLESS STEEL CHEMICAL PROPERTIES

Grade	C (Max)	Mn (Max)	P (Max)	S (Max)	Si (Max)	Cr	Ni	Mo	Nitrogen (Max)	Cu/ Others
201	0.15	5.50/ 7.50	0.06	0.03	1	16.0/ 18.0	3.5/5.5	–	–	n-25 max
202	0.15	7.50/ 10.0	0.06	0.030.	1	17.0/ 19.0	4.0/6.0	–	–	n-25 max
JS- 203	0.08	9.25/ 10.25	0.07	0.03	0.75	14.25 – 15.25	2.25 – 2.75	–	–	1.60- 2.0
301	0.15	2	0.045	0.03	1	16.00 – 18.00	6.00 – 8.00	–	0.1	–
301M	0.1	4.5/ 5.5	0.06	0.03	0.75	14.50 – 15.50	6.0 – 7.0	–	–	1.70- 1.90
304	0.08	2	0.045	0.03	0.75	18.00 – 20.00	8.00- 10.50	–	0.1	–
304L	0.03	2	0.045	0.03	0.75	18.00 – 20.00	8.00- 12.00	–	0.1	–
309s	0.08	2	0.045	0.03	1	22.0/24.0	12.0/15.0
310	0.25	2	0.045	0.03	1.5	24.0/26.0	19.0/22.0
310S	0.08	2	0.045	0.03	1.5	24.00- 26.00	19.00 – 22.00	–	–	–
316	0.08	2	0.045	0.03	0.75	16.00 – 18.00	10.00 – 14.00	2.00 – 3.00	0.1	–
316L	0.03	2	0.045	0.03	0.75	16.00 – 18.00	10.00 – 14.00	2.00 – 3.00	0.1	–
317	0.08	2	0.045	0.03	0.75	18.00 – 20.00	11.00 – 14.00	3.00 – 4.00	0.1	–
317L	0.03	2	0.045	0.03	0.75	18.00 – 20.00	11.00 – 15.00	3.00 – 4.00	0.1	–
321	0.08	2	0.045	0.03	0.75	17.00 – 19.00	9.00 – 12.00	–	0.1	Ti5 ( C + N ) Min or 0.70 max
347	0.08	2	0.045	0.03	0.75	17.00 – 19.00	9.00 – 13.00	–	–	Cb= 10x ( C Min ) or 1.00 Max
409	0.08	1	0.04	0.01	1	10.50 – 11.75	0.5	–	–	Ti= 6x (C+ N ) Min or 0.70 Max
409M	0.03	0.8/ 1.2	0.03	0.03	0.40.75	11.00- 12.00	1.5 max.	–	–	Ti= 6x (C) Min or 0.70 Max
410S	0.08	1	0.04	0.03	1	11.50- 13.50	0.6	–	–	–
410	0.15	1	0.04	0.03	1	11.50- 13.50	0.75	–	–	–
420	0.35	0.5	0.035	0.015	0.5	12.00 – 13.00	0.20.3	–	–	–
440A	0.60/0.70	1	0.04	0.03	1	16.0/18.0	–	–	–	–
440B	0.75,0.95	1	0.04	0.03	1	16.0/18.0	–	–	–	–
440C	0.95, 1.2	1	0.04	0.03	1	16.0/18.0	–	–	–	–
430	0.12	1	0.04	0.03	1	16.00 – 18.00	0.75	–	–	–
JSL AUS	0.08	7.0/ 8.0	0.07	0.03	0.75	15.50 – 16.50	4.25 – 4.75	–	–	0.9 – 1.10
904L	0.02	2	0.03	0.045	1	19.0-23.0	23.0-28.0	–	–	23.0-28.0
2205	0.03	2	0.03	0.02	1	21.0-23.0	4.5-6.5	4.5-6.5
2207	0.03	1.2	0.035	0.02	0.3	24.0-26.0	6.0-8.0	–	–	6.0-8.0
* Thickness of 1.27mm & below will have elongation of 20% min.

STAINLESS STEEL MECHANICAL PROPERTIES

MECHANICAL PROPERTIES
Grade	Tensile	Yield	%Age	Hardness (Max)	–
–	Strength Mpa, (Min)	Strength	Elongation	–	–
–	–	Mpa, (Min)	in 50mm	–	–
–	–	–	gauge length min	BHN	Rb
301	515	205	40	217	95
304	515	205	40	201	92
304L	485	170	40	201	92
310S	515	205	40	217	95
316	515	205	40	217	95
316L	485	170	40	217	95
317	515	205	35	217	95
317L	515	205	40	217	95
321	515	205	40	217	95
347	515	205	40	201	92
409	380	170	20	179	88
409M	430	275	20	187	90
410S	415	205	22	183	89
410	450	205	20	217	89
420	700( max )	–	15	217	95
430	450	205	22	183	89
JSL AUS	515	205	40	217	95
JS- 203	515	205	40	217	95
301M	515	205	40	217	95

NICKEL ALLOY CHEMICAL PROPERTIES

CHEMICAL PROPERTIES

Co%

Cr%

Mo%

Ni%

Ai%

Cu%

Nb/Cb Ta%

Ti%

Fe%

Sonstige Autres-Other%

Designation Comercial

–

Comercial designation

–

Monel 400

0.12

–

1.5

Mn 1.0

Monel 401

0.1

–

0.75

Si 0.25; Mn 2.25

Monel 404

0.15

–

52.0-57.0

–

0.05

rest/bal

–

0.5

Mn 0.10; Si 0.10;S o.024

Monel 502

0.1

–

63.0-17.0

–

2.5-3.5

rest/bal

–

0.5

Mn 1.5;Si 0.5; S 0.010

Monel K 500

0.13

–

2.8

–

0.6

Mn 0.8

Monel R 405

0.15

–

1.2

Mn 1.0; S 0.04

Hastelloy B

0.1

1.25

0.6

rest/bal

0.3

–

5.5

Mn 0.80; Si 0.70

Hastelloy B2

0.02

26.0-30.0

rest/bal

–

Mn 1.0: Si 0.10

Hastelloy C

0.07

1.25

rest/bal

0.3

–

5.75

Mn 1.0 :Si 0 0.70

Hastelloy C4

0.015

14.0-18.0

14.0-17.0

rest/bal

–

0..70

Mn 1.0 ; Si 0.08

Hastelloy- C 276

0.02

2.5

14.0-16.5

15.0-17.0

rest/bal

0.35

3.0-4.5

–

4.0-7.0

Mn 1.0;Si 0.05

Hastelloy F

0.02

1.25

6.5

rest/bal

–

0.5

–

Nb2.10

–

Mn 1.50;Si 0.50

Hastelloy G

0.05

2.5

21.0-23.5

5.5-7.5

rest/bal

–

1.5-2.5

Nb1.75-2.5

–

18.0-21.0

Mn 1.0-2.0;p0.04;Si 1.0;80.03

Hastelloy G-2

0.03

–

23.0-26.0

5.0-7.0

47.0-52.0

–

0.70-1.20

–

0.70-1.50

rest/bal

Mn 1.0;Si 1.0

Hastelloy N

0.06

0.25

16.5

rest/bal

–

0.2

–

0.1

–

Mn 0.40;Si 0.25;B0.01

Hastelloy S

0.02

15.5

14.5

rest/bal

0.6

0.2

–

Mn 0.50;Si 0.40;B0.0009;LA 0.02

Hastelloy W

0.06

1.25

24.5

rest/bal

–

5.5

Mn 0.050 ; Si 0.50

Hastelloy X

0.1

1.5

rest/bal

–

0.6

–

18.5

–

Mn 0.6; Si 0.60

Incoloy 800

0.04

–

0.3

–

0.4

–

Incoloy 800 H

0.08

–

0.3

–

0.4

–

Incoloy 801

0.05

–

20.5

–

1.1

–

Incoloy 802

0.35

–

0.6

–

0.7

–

Incoloy 804

0.05

–

29.5

–

0.3

–

0.6

25.4

–

Incoloy 805

0.12

–

7.5

0.5

–

0.1

–

rest/bal

Mn 0.60;Si 0.50

Incoloy 810

0.25

–

0.5

–

rest/bal

Mn 0.90; Si 0.80

Incoloy 825

0.04

–

Incoloy 825 Cp

0.04

–

21.5

–

2.2

Nb0.9

–

Incoloy 840

0.08

–

rest/bal

Mn 1.0;Si 1.0

Incoloy 901

0.05

–

12.5

rest/bal

–

0.15

–

2.7

Mn 0.24;Si 0.12;B0.015

Incoloy 901 Mod

0.05

–

12.5

5.8

rest/bal

–

2.9

Mn 0.09;Si 0.08;B0.015

Incoloy 903

0.02

–

0.7

–

Nb 3.0

1.4

–

Incoloy 904

0.02

–

1.7

–

Incoloy DS

0.06

–

Mn 1.0; Si 2.3

Incoloy Ma- 956

–

4.5

–

0.5

74.4

Y2.03 0.5

Incoloy 600

0.05

–

15.5

–

Incoloy 601

0.05

–

1.4

–

Incoloy 604

0.04

–

15.8

–

rest/bal

–

0.1

Nb 2.0

–

7.2

Mn 0.20; Si 0.20

Incoloy 610

0.2

–

15.5

–

rest/bal

–

0.5

Nb 1.0

–

Mn 0.90;Si 2.0

Incoloy 617

0.07

12.5

22.5

–

Incoloy 625

0.05

–

21.5

–

0.4

–

Nb 3.65

0.4

2.5

Mn 0.50; Si 0.50

Incoloy 671

0.05

–

0.35

–

Incoloy 700

0.12

28.5

3.75

–

0.05

–

2.2

0.7

Mn 0.10; Si 0.30

Incoloy 702

0.04

–

15.6

–

rest/bal

–

3.4

0.1

–

0.7

0.35

Mn 0.05: Si 0.20

Incoloy 705

0.3

–

15.5

–

rest/bal

–

0.5

–

Mn 0.90 ; Si 5.5

CARBON STEEL CHEMICAL PROPERTIES

Low Carbon Steel grade Chemical Composition

Grade

UNS

Number

(max)

1010

G10100

0.05%

.08-.13%

0.04%

.30-.60%

–

1018

G10180

0.05%

.14-.20%

0.04%

.60-.90%

–

1020

G10200

0.05%

.17-.23%

0.04%

.30-.60%

–

1022

G10220

0.05%

.17-.23%

0.04%

.70-1.00%

–

Medium Carbon Steel Grades Chemical Properties

Grade

UNS

Number

(max)

1010

G10100

.30-.60%

0.05%

.08-.13%

0.04%

–

1018

G10180

.60-.90%

0.05%

.14-.20%

0.04%

–

1020

G10200

.30-.60%

0.05%

.17-.23%

0.04%

–

1022

G10220

.70-1.00%

0.05%

.17-.23%

0.04%

–

Carbon Steel Mechanical Properties

Alloy Type	AISI	Carbon content (wt.%)	Yield strength (MPa)	Tensile strength (MPa)	Ductility (% elongation in 50 mm)
Low	1010	0.1	180	325	28
Low	1020	0.2	205	380	25
Low	A36	0.29	220	400	23
Low	A516 Gr 70	0.31	260	485	21
Medium	1030	.27 – .34	325	460	12
Medium	1040	.37 – .44	415	620	25
High	1080	.75 – .88	440	924	12
High	1095	.90 – 1.04	380	665	10

DUPLEX STEEL CHEMICAL PROPERTIES

	C	Mn	Si	P	S	Cr	Mo	Ni	N
2205	0.03	2	1	0.03	0.02	min: 21.0	min: 2.5	min: 4.5	min: 0.08
(S31803)	max	max	max	max	max	max: 23.0	max: 3.5	max: 6.5	max: 0.20
2205	0.03	2	1	0.03	0.02	min: 22.0	min: 3.0	min: 4.5	min: 0.14
(S32205)	max	max	max	max	max	max: 23.0	max: 3.5	max: 6.5	max: 0.20

DUPLEX STEEL MECHANICAL PROPERTIES

Grade	2205	UR52N+
Tensile Strength (MPa)	620	770
Proof Stress 0.2% (MPa)	450	550
Elongation A5 (%)	25	25

SUPER DUPLEX STEEL CHEMICAL PROPERTIES

Element	Min	Max
C	–	0.03
Cr	24	26
Cu	0.5	1
Mn	–	2
Mo	3	5
N	0.24	0.35
Ni	6	8
P	–	0.35
S	–	0.015
Si	–	1

SUPER DUPLEX STEEL MECHANICAL PROPERTIES

Temper	Annealed
Tensile Rm	115	ksi (min)
Tensile Rm	800	MPa (min)
R.p. 0.2% Yield	80	ksi (min)
R.p. 0.2% Yield	550	MPa (min)
Elongation (2” or 4D gl)	15	% (min)